Install the exhaust pipe. To do this, connect the protrusive end of the elbow to the exhaust pipe connector on the heater and turn it 90 degrees clockwise to lock it in place. Connect the muffler and the two exhaust pipes in turn and then put the two protective covers on top.

If the heater is used in a closed environment, it is necessary to divert the exhaust gases outside the room. Moreover, the exhaust gases must be vented outside the heated space so that they do not return through a ventilating device or window.

When the heater is located outside the heated room, an air intake and air outlet pipes must be installed. Insert the air duct connections into the heater inlet and outlet openings, respectively, and turn the air duct clockwise to fix. To prevent heat loss, a thermal insulation cover must be fitted to the air pipe. 

The heater power is adjustable in the range between 1 and 4 kW. 
The heater operates on diesel fuel. 

The device has a convenient remote control indicating power, voltage, and temperature.

The fuel tank volume is 3.7 liters.

Diesel fuel consumption is 0.1 - 0.35 liters per hour.

Diesel fuel consumption in 2 kW power mode is 150ml/h.
It takes only 1.5 liters of diesel fuel for 10 hours of operation.

Can work up to 24 hours with a consumption of 3.7 liters (in 2 kW power mode).

Operating environment temperature: down to minus 40 °С.